Side-Power SEP 100/185 T Servisní příručka stáhnout pdf (Strana 116)

902 - 4 Page Date: 4. Februar 2011

Section 902

Electric Pedal Adjustment

Pilot´s Operating Handbook

EXTRA 330LX

902.7 DESCRIPTION OF THE SYSTEM

The electrical pedal adjustment system consists of a foot rest and the rudder pedal itself,

including brake pedal and brake cylinder. An S-shaped cable leader is attached to the rudder

pedal, through which the control cable runs from the rudder actuator arm to the front cable

attachment at the steel frame. The connection to the front seat pedals is realized by a further

cable, which is fixed to the control cable by two Nicopress oval sleeves. The stepless pedal

adjustment is realized by electromechanical actuators which are controlled separately by

switches on the rear instrument panel (refer to Figure 1 below). The total travel of the system

is limited to 160 mm (6.3") by a front and a rear stop switch at the slide tube attachment. A

full travel from the most rearward to the most forward position takes approximately 10 sec.

Figure 1, Switch/Circuit Breaker Location

902.8 HANDLING, SERVICING AND MAINTENANCE

Not affected.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 283 284

Žádné komentáře

Side-Power SEP 100/185 T Servisní příručka Strana 116